SAYA Quarry Cleaner is a special surfactant blended specially for use with quarry (clay) tiles and clay pavers, for the removal of lime, cement, and water stains.

Quarry Cleaner is supplied as a concentrated material and should be diluted with clean water according to requirements. The diluted Quarry Cleaner should be applied onto a dry floor liberally with a mop or suitable implement. After foaming action has stopped, agitate with a scrubber or yard broom, this will remove any residual stains.

Rinse or flush floor completely, do not allow product to dry on floor. Ensure that the rinsing is done from one direction to another, so that dissolved material does not redeposit onto clean floor.

Dilute in to 1:1 ratio with water.
Test it on one corner of the surface & observe for 24 hours.
Dilute more with water, if required.
Using a clean cloth, apply on the surface & brush after 5 minutes.
Wash well with water for clean surface.

Recommended to wear gloves. Corrosive and can cause skin burn on contact. Wash hands thoroughly after handling. Keep outreach of children. Use only for recommended areas.